Fasteners Holders, Washers and Clevises
FASTENERS HOLDERS
Fastener holders are designed and manufactured to assure maximum safety margins and lasting service. These holders are designed to the customer’s fastener specifications to maximize precision and efficiency.
| Model | CAP | Range | A | B | C | D | E | F | G | H | I | J |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 120,000 | 0-.500 | 5 | 2.5 | 0.56 | 1.81 | 0.13 | 2.44 | 1.28 | 1.63 | 0.57 | 1.5 |
| 2 | 150,000 | .510-1.0 | 7 | 3.63 | 1.12 | 1.75 | 0.5 | 4.5 | 2.5 | 3 | 1.07 | 1.5 |
| 3 | 200,000 | 1.01-1.5 | 8 | 3.5 | 1.5 | 2.5 | 0.5 | 6 | 3 | 3.5 | 1.57 | 2.5 |
| 4 | 300,000 | 1.51-2.0 | 10 | 4.37 | 2.13 | 2.25 | 1.25 | 7.5 | 3.66 | 4 | 2.07 | 3.5 |
FASTENERS WASHERS
FASTENER WASHERS(NOT THREADED)
X) Fastener diameter
A) Fastener diameter
B) Washer width
C) Fastener diameter + ASTM clearance
D) Radius
| X | .250+ | .500+ | .750+ | 1.00+ | 1.250+ | 1.50+ | 1.75+ | 2 |
|---|---|---|---|---|---|---|---|---|
| A | 1.25 | 2.47 | 2.47 | 2.94 | 2.94 | 3.6 | 0.36 | 0.36 |
| B | 0.32 | 0.44 | 0.44 | 0.56 | 0.56 | 0.62 | 0.75 | 0.75 |
| C | X+.030 | X+.030 | X+.050 | X+.060 | X+.060 | X+.094 | X+.094 | X+.094 |
| D | 0.03 | 0.03 | 0.06 | 0.06 | 1.25 | 0.125 | 0.25 | 0.25 |
FASTENER WASHERS(THREADED)
X) Fastener diameter
A) Washer diameter
B) Washer width
C) Thread size
| X | .250+ | .500+ | .750+ | 1.00+ | 1.25+ | 1.50+ | 1.75+ | 2 |
|---|---|---|---|---|---|---|---|---|
| A | 1.25 | 2.47 | 2.47 | 2.94 | 2.94 | 3.6 | 3.6 | 3.6 |
| B | .250-.37 | .37-1.5 | .37-1.5 | 1.5-2.3 | 1.5-2.3 | 2.3-3.0 | 2.3-3.0 | 2.3-3.0 |
| C* | 20, 28 | 13, 20 | 10, 16 | 8, 14 | 7, 12 | 6, 12 | 5, 12 | 4.5, 12 |
*Any thread may be special ordered.
ANGLE WASHER(SMOOTH AND THREADED)
X) Fastener diameter
A) Washer diameter
B) Washer width
C) Fastener diameter + ASTM clearance
D) Angle
| X | .250+ | .500+ | .750+ | 1.00+ | 1.250+ | 1.50+ | 1.75+ | 2 |
|---|---|---|---|---|---|---|---|---|
| A | 1.25 | 2.47 | 2.47 | 2.94 | 2.94 | 3.6 | 3.6 | 3.6 |
| B | .41-.50 | .50-.94 | .50-.94 | .94-1.0 | .94-1.0 | 1.0-1.3 | 1.0-1.3 | 1.0-1.3 |
| C | X+.030 | X+.030 | X+.50 | X+.060 | X+.060 | X+.094 | X+.094 | X+.094 |
| D | 6, 10 | 6, 10 | 4, 6, 10 | 4, 6 | 4, 6 | 4, 6 | 4, 6 | 4, 6 |
CLEVISES - TENSION AND FATIGUE
| Spec | 0.125 | 0.25 | 0.5 | 0.75 | 1 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 |
| Size | ||||||||||||
| A | 0.13 | 0.257 | 0.515 | 0.772 | 1.03 | 1.545 | 2.05 | 2.575 | 3.09 | 4.12 | 5.15 | 6.18 |
| B | 2.5 | 2.5 | 2.5 | 2.75 | 3 | 4 | 5 | 6.25 | 7 | 9 | 10.8 | 12.35 |
| C | 0.76 | 0.76 | 0.76 | 1.14 | 1.52 | 2.28 | 3.04 | 3.8 | 4.56 | 6.08 | 7.6 | 9.12 |
| D | 0.26 | 0.26 | 0.26 | 0.39 | 0.52 | 0.78 | 1.04 | 1.3 | 1.56 | 2.08 | 2.8 | 3.12 |
| E | 0.75 | 0.875 | 1.1 | 1.52 | 2.03 | 3.05 | 4.06 | 5.08 | 6.09 | 8.12 | 10.15 | 12.18 |
| F | 1 | 1 | 1.2 | 1.2 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.8 | 6 | 7.2 |
| G | «-20 | «-20 | ?-10 | ?-10 | ?-10 | 7/8/2009 | 8-Jan | 8-Jan | 1 «-6 | 12-Feb | 12-Feb | 12-Feb |
| H | 1 | 1 | 1 « | 1 « | 1 1/2 | 1.37 | 1.5 | 1.5 | 2.25 | 3 | 3 | 3 |
| I | 0.25 | 0.25 | 0.25 | 0.375 | 0.5 | 0.75 | 1 | 1.25 | 1.5 | 2 | 2.5 | 3 |
| J | 0.05 | 0.05 | 0.06 | 0.18 | 0.37 | 0.5 | 0.75 | 0.87 | 0.87 | 1 | 1 | 1 |
| K | 0.31 | 0.31 | 0.31 | 0.375 | 0.5 | 0.75 | 1 | 1.25 | 1.5 | 2 | 2.5 | 3 |
| L | 1.26 | 1.38 | 1.61 | 2.03 | 2.58 | 3.61 | 4.62 | 5.73 | 6.74 | 8.77 | 10.7 | 12.73 |
| M | 0.9 | 1.02 | 1.25 | 1.65 | 2.2 | 3.2 | 4.2 | 5.25 | 6.25 | 8.25 | 10.18 | 12.21 |
| N | 0.235 | 0.235 | 0.235 | 0.365 | 0.475 | 0.715 | 0.965 | 1.193 | 1.435 | 1.915 | 2.405 | 2.905 |
| O | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |