Tinius Olsen
Grips for Tinius Olsen Equipment
Order Number
DIMENSIONS
| Machine | Gear | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Capacity | Flats | Vees | Blocks | Radius | A | B | C | D | Rack |
| 60,000 | X-75 | XV-75 | XB-75 | XR-75 | 2.75 | 3.75 | 1.25 | * | Straight |
| 60,000 | X-77 | XV-77 | XB-77 | XR-77 | 2.75 | 3.75 | 1.25 | * | Straight |
| 60,000 | X-79 | XV-79 | XB-79 | XR-79 | 2.5 | 3.75 | 1.25 | * | Straight |
| 60,000 | X-92 | XV-92 | XB-92 | XR-92 | 2.5 | 3.75 | 1.12 | * | None |
| 120,000 | X-35 | XV-35 | XB-35 | XR-35 | 3 | 4.25 | 1.5 | * | None |
| 120,000 | X-89 | XV-89 | XB-89 | XR-89 | 3 | 4.25 | 1.5 | * | Straight |
| 200,000 | X-95 | XV-95 | XB-95 | XR-95 | 3.5 | 6 | 2 | * | Straight |
| 200,000 | X-96 | XV-96 | XB-96 | XR-96 | 3.5 | 6.5 | 2 | * | None |
| 300,000 | X-97 | XV-97 | XB-97 | XR-97 | 4 | 6.75 | 2.25 | * | Straight |
| 300,000 | X-93 | XV-93 | XB-93 | XR-93 | 4 | 6.75 | 2.5 | * | None |
| 400,000 | X-90 | XV-90 | XB-90 | XR-90 | 4.5 | 8 | 2.75 | * | Straight |
| 400,000 | X-57 | XV-57 | XB-57 | XR-57 | 4.5 | 8 | 2.5 | * | None |
| 600,000 | X-64 | XV-64 | XB-64 | XR-64 | 6.25 | 10 | 4 | * | None |
*For XV orders customer specifies minimum and maximum sample diameters
*For XR orders customer specifies male and female radius
*For XB orders see insert section
*For hydraulic grip lifting systems specify thread size and hole spacing
FLAT GRIP
BLOCK GRIP
RADIUS GRIP(S)
VEE GRIP
Inserts for Tinius Olsen Equipment
| Style | Capacity | A* | B* | C* |
|---|---|---|---|---|
| 75 | 60,000 | 2 « | 3 | 8-Mar |
| 77 | 60,000 | 2 « | 3 | 8-Mar |
| 79 | 60,000 | 2 | 3 | 16-May |
| 92 | 60,000 | 2 « | 3 | 8-Mar |
| 35 | 120,000 | 3 | 3 « | 8-Mar |
| 89 | 120,000 | 2 « | 3 | 8-Mar |
| 95 | 200,000 | 2 « | 5 « | « |
| 96 | 200,000 | 2 « | 5 « | « |
| 93 | 300,000 | 2 7/8 | 5 « | 8-May |
| 97 | 300,000 | 2 7/8 | 5 « | 8-May |
| 57 | 400,000 | ** | ** | ** |
| 90 | 400,000 | 3 | 6 3/8 | 8-May |
| 64 | 600,000 | *** | *** | *** |
*Dimensions are for flats only, for Vees, Radius, and 360 Inserts A, B, and C, are made to customer supplied dimensions.
**The model 57 Block is available in three dimensions corresponding to the three versions of this model.
***Made to customer specifications.
FLAT INSERT
VEE INSERT
Pinions for Tinius Olsen Equipment
| Model | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|
| 75* | 0.62 | 1.16 | 0.75 | 1.62 | 2.25 | 1.25 | 1.25 | 1.87 | 9.25 |
| 77* | 0.62 | 1.16 | 0.75 | 1.62 | 2.25 | 1.25 | 1.25 | 1.87 | 9.25 |
| 79* | 0.62 | 1.16 | 0.75 | 1.62 | 2.25 | 1.25 | 1.25 | 1.87 | 9.25 |
| 89* | 0.95 | 1.5 | 0.75 | 1.5 | 1.5 | 4.18 | 2 | 2 | 13.31 |
| 95* | 0.95 | 1.5 | 0.75 | 2.25 | 2.25 | 5.13 | 1.75 | 2 | 17.75 |
| 97* | 0.95 | 1.43 | 0.75 | 3.31 | 4 | 2.25 | 1.62 | 2 | 19.5 |
| 90* | 0.95 | 1.43 | 0.87 | 2.5 | 3.31 | 6.87 | 1.31 | 2.5 | 18.5 |
*Please check your pinions against the dimensions listed prior to ordering.
Liners for Tinius Olsen Equipment
| Model | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| 75 | 4 | 3.5 | 2.5 | 2.98 | 1.75 | 0.62 |
| 77 | 4 | 3.5 | 2.5 | 2.98 | 1.75 | 0.62 |
| 79 | 4 | 3 | 2.13 | 2.52 | 1.75 | 0.62 |
| 92 | 4 | 3.5 | 2.5 | 2.98 | 1.75 | 0.62 |
| 89 | 7 | 4 | 2.5 | 2.98 | 3.25 | 1 |
| 95 | 9.18 | 5 | 3 | 3.5 | 3.5 | 1 |
| 96 | 9.18 | 5 | 3 | 3.5 | 3.5 | 1 |
| 93 | 9.75 | 5 | 3.98 | 5 | 1.25 | 1.25 |
| 97 | 9.75 | 5 | 3.98 | 3.25 | 1.25 | 4 |
| 57 | 11 | 6 | 4.46 | 4.46 | 1 | 1.25 |
| 90 | 12.5 | 6 | 4.5 | 4.5 | 1.25 | 1.25 |
K-Grips for Tinius Olsen Equipment
XMI manufactures a full range of replacement grip faces for Tinius Olsen equipment all available in 5,000 lb, 12,000 lb, and 30,000 lb capacity.
FLAT GRIP
VEE GRIP
BLOCK GRIP
